Taylor XH-400RC Removable Counterweight

Features

Standard Features:

  • 12,400 Pound Removable Counterweight
  • 51,700 lb. Vehicle Transport Weight w/o Counterweight
  • 11-ft. ULTRA-VU 2-Stage Mast (146-in lowered height)
  • 100-in Pin-type "C" Carriage
  • 4.5-in X 8.5-in X 96-in pin mounted Forks
  • Cummins QSB 6.7L 200 Hp Tier-4 Final diesel engine
  • Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension)
  • Dana TC-32 3-Speed powershift Transmission
  • Powertrain Protection System for engine and transmission
  • AxleTech PRC-1756W planetary drive axle with wet disc brakes
  • Taylor 400 welded steel steer axle (single hydraulic cylinder design with heavy duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • Solid plate steer angle limitation (more contact area than bolt heads which require adjustment)
  • 12.00 X 24 - 24PR bias pneumatic drive and steer tires (high load)

Chassis

  • All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
  • Integral counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Sliding engine hood (on rollers), side service doors and removable floor panels open to expose drive train for ease of maintenance.

Cab

  • Enclosed 2-door steel all-welded Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
  • 32,000 BTU heater and interior circulation fan
  • Tinted glass with front and rear windshield wipers and front windshield washer
  • Fully adjustable air ride swivel seat with 35° of rotation (15°/20° left-right)
  • Multifunction Joystick mounted on adjustable arm rest (11-button command with integrated directional shift control)
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) with 7-in touch screen color display
  • One-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • Color and number coded wiring.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical

  • 24-volt electrical system with 95 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Dual electric trumpet horns (116 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms
  • (4) forward facing LED work lights (cab mounted)
  • (2) rear facing LED work lights ("A" pillar mounted)
  • (2) LED work lights (mast mounted)

VIP

  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video

XH-400RC

Removable Counterweight

Quick Specs
Capacity 40K lbs / 18K kg
Load Center 48 in / 1219 mm
Wheelbase 155.0 in / 3937 mm
Transmission TC-32 3-sp. APC
Mast 11 UV
Carriage C-100
Forks 4.5x8.5x96 in
Brakes Hydraulic
Volts 24
Tires 12.00 X 20 - 24PR
Find Dealer

Features

Standard Features:

  • 12,400 Pound Removable Counterweight
  • 51,700 lb. Vehicle Transport Weight w/o Counterweight
  • 11-ft. ULTRA-VU 2-Stage Mast (146-in lowered height)
  • 100-in Pin-type "C" Carriage
  • 4.5-in X 8.5-in X 96-in pin mounted Forks
  • Cummins QSB 6.7L 200 Hp Tier-4 Final diesel engine
  • Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension)
  • Dana TC-32 3-Speed powershift Transmission
  • Powertrain Protection System for engine and transmission
  • AxleTech PRC-1756W planetary drive axle with wet disc brakes
  • Taylor 400 welded steel steer axle (single hydraulic cylinder design with heavy duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • Solid plate steer angle limitation (more contact area than bolt heads which require adjustment)
  • 12.00 X 24 - 24PR bias pneumatic drive and steer tires (high load)

Chassis

  • All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
  • Integral counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Sliding engine hood (on rollers), side service doors and removable floor panels open to expose drive train for ease of maintenance.

Cab

  • Enclosed 2-door steel all-welded Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
  • 32,000 BTU heater and interior circulation fan
  • Tinted glass with front and rear windshield wipers and front windshield washer
  • Fully adjustable air ride swivel seat with 35° of rotation (15°/20° left-right)
  • Multifunction Joystick mounted on adjustable arm rest (11-button command with integrated directional shift control)
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) with 7-in touch screen color display
  • One-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • Color and number coded wiring.
  • Dual USB charging ports
  • Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical

  • 24-volt electrical system with 95 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Dual electric trumpet horns (116 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms
  • (4) forward facing LED work lights (cab mounted)
  • (2) rear facing LED work lights ("A" pillar mounted)
  • (2) LED work lights (mast mounted)

VIP

  • Operators Guide
  • Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
  • Safety Check Manual and Video