Standard Features

• 15' Direct Lift 2-Stage Mast (276-in lowered height)
• 120-in Pin-type ";C"; Carriage with individual fork positioning & side shift
• 660V All-electric battery power drivetrain. Two-full shift run time (under normal work cycles)
• 4.5 hours full charging time with 180 kW external charging equipment
• 6-in X 12-in X 96-in pin-mounted Forks
• Kessler D-106 planetary drive axle with wet disc brakes
• Taylor 600 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered oller bearing mounted spindles)
• Dana E-axle (144 P453)
• Energy Recovery Technology (through regenerative braking)
• Taylor HD-550 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
• 18 X 33 - 40PR bias pneumatic drive and steer tires

Chassis

• All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
• Bolted Counterweight
• Lockable Fuel Cap
• Replaceable bolt-on steps and handrails
• Side service doors and removable floor panels open to expose drive train for ease of maintenance.

Cab

• Enclosed 2-door steel all-welded DREAM Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
• Heater and defrost
• Tinted glass with front and rear windshield wipers and washers
• Fully adjustable air ride swivel seat
• Multifunction Joystick mounted on adjustable arm rest (integrated directional shift control)
• Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
• Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
• Taylor Integrated Control System (TICS)
• 7-in touch screen color display
• TaylorTrak Pro Advanced Fleet Telematics hardware
• The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
• All wiring is color and number-coded.
• Dual USB charging ports
• Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical (Low Voltage)

• 24-volt electrical system with 110 amp alternator
• Dual heavy-duty batteries
• Battery disconnect/lock-out switch
• (4) forward facing LED work lights (Cab mounted)
• (2) rear facing LED work lights (Cab mounted)
• (2) LED work lights (Mast mounted)
• Circuit breakers with heavy duty connectors (no automotive type fuses)
• Breaker reset switches
• Key-type anti-restart ignition switch
• Dual trumpet air horns (126 dBA)
• Keyswitch-actuated amber strobe light
• Forward and reverse-actuated warning alarms

Vehicle Information Package

• Operators Guide
• Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
• Safety Check Manual and Video