Standard Features

• 11' ULTRA-VU 2-Stage Mast (155-in lowered height)
• 100-in Pin-type ";C"; Carriage with individual fork positioning & side shift
• 5-in X 10-in X 96-in pin mounted Forks
• Permanent Magnet Synchronous Motor
• 100+/- minutes charging time
• High voltage electrical system (660 volt)
• Nickel-Manganese-Cobalt Battery Technology
• Dana E-axle (144 P453)
• Energy Recovery Technology (through regenerative braking)
• Taylor HD-450 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
• 14 X 25 - 20PR bias pneumatic drive and steer tires (high load)

Chassis

• All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
• Replaceable bolt-on steps and handrails
• A-Pillar design with overhead tilt cylinders provides enhanced structural rigidity for chassis and mast.

Cab

• Enclosed 2-door steel all-welded DREAM Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
• Cab heater and interior circulation fan
• Tinted glass with front and rear windshield wipers and front windshield washer
• Fully adjustable air ride swivel seat
• Multifunction Joystick mounted on adjustable arm rest with integrated directional shift control
• Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
• Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
• Taylor Integrated Control System (TICS)
• 7-in touch screen color display
• TaylorTrak Pro Advanced Fleet Telematics hardware
• The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
• All wiring is color and number coded.
• Dual USB charging ports
• Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical (Low Voltage)

• 24-volt electrical system
• Dual heavy-duty lead-acid batteries (for system startup)
• Battery disconnect/lock-out switch
• (4) forward facing LED work lights (cab mounted)
• (2) rear facing LED work lights (";A"; pillar mounted)
• (2) LED work lights (mast mounted)
• Circuit breakers with heavy duty connectors (no automotive type fuses)
• Breaker reset switches
• Key-type anti-restart ignition switch
• Dual electric trumpet horns (116 dBA)
• Keyswitch-actuated amber strobe light
• Forward and reverse-actuated warning alarms

Vehicle Information Package

• Operators Guide
• Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
• Safety Check Manual and Video