ZH-350L
Electric Lifts
48 "
148.0"
35K lbs.
| Transmission | |
|---|---|
| Mast | 11' UV |
| Carriage | C-100 SS/FP |
| Forks | 4x8x96 in |
| Brakes | Regenerative |
| Volts | 24 |
| Tires | 12.00 X 20 - 24PR |
Features
Standard Features
- 11' ULTRA-VU 2-Stage Mast (152-in lowered height)
- 100-in Pin-type ";C"; Carriage with individual fork positioning & side shift
- 4-in X 8-in X 96-in pin mounted Forks
- Permanent Magnet Synchronous Motor
- 90+/- minutes charging time
- High voltage electrical system (660 volt)
- Nickel-Manganese-Cobalt Battery Technology
- Dana E-axle (144 P453)
- Energy Recovery Technology (through regenerative braking)
- Taylor HD-300 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
- 12.00 X 20 - 24PR bias pneumatic drive and steer tires (high load)
Chassis
- All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
- Replaceable bolt-on steps and handrails
- A-Pillar design with overhead tilt cylinders provides enhanced structural rigidity for chassis and mast.
Cab
- Enclosed 2-door steel all-welded DREAM Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
- Cab heater and interior circulation fan
- Tinted glass with front and rear windshield wipers and front windshield washer
- Fully adjustable air ride swivel seat
- Multifunction Joystick mounted on adjustable arm rest with integrated directional shift control
- Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
- Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
- Taylor Integrated Control System (TICS)
- 7-in touch screen color display
- TaylorTrak Pro Advanced Fleet Telematics hardware
- The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
- All wiring is color and number coded.
- Dual USB charging ports
- Hydrostatic, steer-on-demand power steering with tilt steering column
Electrical (Low Voltage)
- 24-volt electrical system
- Dual heavy-duty lead-acid batteries (for system startup)
- Battery disconnect/lock-out switch
- (4) forward facing LED work lights (cab mounted)
- (2) rear facing LED work lights (";A"; pillar mounted)
- (2) LED work lights (mast mounted)
- Circuit breakers with heavy duty connectors (no automotive type fuses)
- Breaker reset switches
- Key-type anti-restart ignition switch
- Dual electric trumpet horns (116 dBA)
- Keyswitch-actuated amber strobe light
- Forward and reverse-actuated warning alarms
Vehicle Information Package
- Operators Guide
- Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
- Safety Check Manual and Video
Industries
Lumber
Distribution
Manufacturing
Food
Textiles
Retail
Features
Standard Features
- 11' ULTRA-VU 2-Stage Mast (152-in lowered height)
- 100-in Pin-type ";C"; Carriage with individual fork positioning & side shift
- 4-in X 8-in X 96-in pin mounted Forks
- Permanent Magnet Synchronous Motor
- 90+/- minutes charging time
- High voltage electrical system (660 volt)
- Nickel-Manganese-Cobalt Battery Technology
- Dana E-axle (144 P453)
- Energy Recovery Technology (through regenerative braking)
- Taylor HD-300 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
- 12.00 X 20 - 24PR bias pneumatic drive and steer tires (high load)
Chassis
- All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
- Replaceable bolt-on steps and handrails
- A-Pillar design with overhead tilt cylinders provides enhanced structural rigidity for chassis and mast.
Cab
- Enclosed 2-door steel all-welded DREAM Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
- Cab heater and interior circulation fan
- Tinted glass with front and rear windshield wipers and front windshield washer
- Fully adjustable air ride swivel seat
- Multifunction Joystick mounted on adjustable arm rest with integrated directional shift control
- Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
- Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
- Taylor Integrated Control System (TICS)
- 7-in touch screen color display
- TaylorTrak Pro Advanced Fleet Telematics hardware
- The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
- All wiring is color and number coded.
- Dual USB charging ports
- Hydrostatic, steer-on-demand power steering with tilt steering column
Electrical (Low Voltage)
- 24-volt electrical system
- Dual heavy-duty lead-acid batteries (for system startup)
- Battery disconnect/lock-out switch
- (4) forward facing LED work lights (cab mounted)
- (2) rear facing LED work lights (";A"; pillar mounted)
- (2) LED work lights (mast mounted)
- Circuit breakers with heavy duty connectors (no automotive type fuses)
- Breaker reset switches
- Key-type anti-restart ignition switch
- Dual electric trumpet horns (116 dBA)
- Keyswitch-actuated amber strobe light
- Forward and reverse-actuated warning alarms
Vehicle Information Package
- Operators Guide
- Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
- Safety Check Manual and Video
We've got
Options
Optimize Your Lift Truck with Custom Equipment and Specialty Parts
Safety Lights
Cameras
Cab Guards
Fire Protection
Load Scale
Rider Seats
Keytroller
Telematics
Ready to get started?
Shoot us a message or contact your local dealer!