ZH-1000
Electric Lifts
48 "
225.0"
100K lbs.
| Transmission | |
|---|---|
| Mast | 15' UV |
| Carriage | C-120 SS/FP |
| Forks | 6x12x96 in |
| Brakes | Regenerative |
| Volts | 24 |
| Tires | 18 X 33 - 36PR |
Features
Standard Features
- 15' Ultra-View, 2-Stage Mast
- 120-in Pin-type "C" Carriage with side-shift
- 6-in X 12-in X 96-in pin mounted Forks
- Emissions Compliant Diesel Engine (Tier 4 Final or Stage V available)
- 660V All-electric battery power drivetrain. Two-full shift run time (under normal work cycles)
- 4.5 hours full charging time with 180 kW external charging equipment
- E-Axle with Energy Recovery Technology through regenerative braking
- Kessler D-106 planetary drive axle with wet disc brakes
- Taylor 600 welded steel steer axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
- 18.00 X 33 - 36PR bias pneumatic drive and steer tires
Chassis
- All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
- Bolted Counterweight
- Lockable Fuel Cap
- Replaceable bolt-on steps and handrails
- Side service doors and removable floor panels open to expose drive train for ease of maintenance.
Cab
- Enclosed 2-door steel all-welded DREAM Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
- Heater and defrost
- Tinted glass with front and rear windshield wipers and washers
- Fully adjustable air ride swivel seat
- Multifunction Joystick mounted on adjustable arm rest (integrated directional shift control)
- Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
- Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
- Taylor Integrated Control System (TICS)
- 7-in touch screen color display
- TaylorTrak Pro Advanced Fleet Telematics hardware
- The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
- All wiring is color and number coded.
- Dual USB charging ports
- Hydrostatic, steer-on-demand power steering with tilt steering column
Electrical (Low Voltage)
- 24-volt electrical system with 110 amp alternator
- Dual heavy-duty batteries
- Battery disconnect/lock-out switch
- (4) forward facing LED work lights (Cab mounted)
- (2) rear facing LED work lights (Cab mounted)
- (2) LED work lights (Mast mounted)
- Circuit breakers with heavy duty connectors (no automotive type fuses)
- Breaker reset switches
- Key-type anti-restart ignition switch
- Dual trumpet air horns (126 dBA)
- Keyswitch-actuated amber strobe light
- Forward and reverse-actuated warning alarms
Vehicle Information Package
- Operators Guide
- Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
- Safety Check Manual and Video
Industries
Lumber
Distribution
Manufacturing
Food
Textiles
Retail
Features
Standard Features
- 15' Ultra-View, 2-Stage Mast
- 120-in Pin-type "C" Carriage with side-shift
- 6-in X 12-in X 96-in pin mounted Forks
- Emissions Compliant Diesel Engine (Tier 4 Final or Stage V available)
- 660V All-electric battery power drivetrain. Two-full shift run time (under normal work cycles)
- 4.5 hours full charging time with 180 kW external charging equipment
- E-Axle with Energy Recovery Technology through regenerative braking
- Kessler D-106 planetary drive axle with wet disc brakes
- Taylor 600 welded steel steer axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
- 18.00 X 33 - 36PR bias pneumatic drive and steer tires
Chassis
- All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
- Bolted Counterweight
- Lockable Fuel Cap
- Replaceable bolt-on steps and handrails
- Side service doors and removable floor panels open to expose drive train for ease of maintenance.
Cab
- Enclosed 2-door steel all-welded DREAM Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
- Heater and defrost
- Tinted glass with front and rear windshield wipers and washers
- Fully adjustable air ride swivel seat
- Multifunction Joystick mounted on adjustable arm rest (integrated directional shift control)
- Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
- Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
- Taylor Integrated Control System (TICS)
- 7-in touch screen color display
- TaylorTrak Pro Advanced Fleet Telematics hardware
- The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
- All wiring is color and number coded.
- Dual USB charging ports
- Hydrostatic, steer-on-demand power steering with tilt steering column
Electrical (Low Voltage)
- 24-volt electrical system with 110 amp alternator
- Dual heavy-duty batteries
- Battery disconnect/lock-out switch
- (4) forward facing LED work lights (Cab mounted)
- (2) rear facing LED work lights (Cab mounted)
- (2) LED work lights (Mast mounted)
- Circuit breakers with heavy duty connectors (no automotive type fuses)
- Breaker reset switches
- Key-type anti-restart ignition switch
- Dual trumpet air horns (126 dBA)
- Keyswitch-actuated amber strobe light
- Forward and reverse-actuated warning alarms
Vehicle Information Package
- Operators Guide
- Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
- Safety Check Manual and Video
We've got
Options
Optimize Your Lift Truck with Custom Equipment and Specialty Parts
Safety Lights
Cameras
Cab Guards
Fire Protection
Load Scale
Rider Seats
Keytroller
Telematics
Ready to get started?
Shoot us a message or contact your local dealer!