Standard Features: GTE-60, & 70

• 130” Max Fork Height 2-Stage Mast with 85.2-in lowered height (GTE-60)
• 125” Max Fork Height 2-Stage Mast with 85.2-in lowered height (GTE-70)
• 1.75-in X 5-in X 42-in pin mounted Forks (GTE-60)
• 2-in X 5-in X 42-in pin mounted Forks (GTE-70)
• 3-phase AC transistorized drive and pump control
• Enclosed dual 9.0 kW (AC) drive motors (independent control for tight turns)
• 19.1 kW AC hydraulic motor
• Planetary Drive Axle with hydraulically actuated wet disc brakes
• Available in 80V Lithium or 48V Lead Acid
• Fully Boxed Welded Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
• Self Activating Parking Brake (SAPB) fully disables the transmission when the parking brake is set
• 23 x 9-10 Solid Pneumatic Drive tires (GTE-60)
• 23 x 10-12 Solid Pneumatic Drive tires (GTE-70)
• 18 x 7-8 PR Solid Pneumatic Steer tires

Cab

• Hydraulic levers conveniently mounted on the hood beside the operator
• Ingress/Egress Handrails
• Rear Handle with Horn Button
• Operator Presence System (traction disable seat switch)
• Hydrostatic Power Steering
• Tilt steering wheel (power steer) with spinner knob
• Dual adjustable convex Rear View Mirrors
• Two pedal brake with inching
• Full-suspension vinyl safety seat with orange seatbelt (w/hip restraints)
• Interactive 5.6 inch” LCD SMART dash (CAN) with On-Board diagnostics
• ZAPI Controllers for advanced control and communication
• Three selectable performance modes and turtle mode

Electrical

• OHG mounted 12 volt LED headlights (including 12 volt converter)
• Rear combination and turn signal lights
• Electric Horn
• Keyswitch-actuated amber strobe light
• Reverse-actuated warning alarms

Vehicle Information Package

• Operator’s Guide
• Maintenance and Service Documentation
• Safety Check Manual and Video

Ergonomics

• 11.2” diameter steering wheel with low-effort steer (w/spinner knob)
• Large electronic directional control with no linkage- FWD/REV selected by moving lever up and down
• Large oversized right lever operates turn signals and headlights
• Large welded grab bar handle for solid secure mount
• Deck mounted hydraulic control levers angled at 15 degrees back for precise driver operation
• Self Activating Parking Brake (SAPB) fully disables the transmission when the parking brake is set

Uprights & Carriages

• Nested I-beam upright design
• Canted load rollers
• Silent staging upright cylinders allows no racking between stages
• Negative drop rails provide easy and inexpensive servicing of carriage
• Spherical bushings on both ends of the tilt cylinders
• Carriage features (6) load and side thrust rollers (shimmable, sealed and canted)External side thrust rollers
• Heavy duty roller chain that has 4 x 4 lacing with 1” pitch
• Load back rest pallet protection
• Fully greaseable pivot points

Overhead Guard

• One piece provides strength and durability
• Longitudinal overhead bars for better sight line when load is up
• Low cowl height for greater visibility when load is in lowered position
• Two forward mounted LED work lights with protective guards are standard
• Rear combination lights (brake, tail and back-up) are standard

Available Options

• 80V - 46AH Lithium Battery
• Partial cabs (Top & Front)
• 220V 3 phase lithium battery charger
• Non-marking solid tires
• Side shifters & Fork positioners
• Fingertip controls (mini-levers)
• Accumulators
• Operator Cab with heater
• Weight Scales
• Automatic fork leveling
• Unitrol Directional Control Pedal
• Vision Plus