Taylor GTE-50 GT-Series
Taylor GTE-50 GT-SeriesTaylor GTE-50 GT-SeriesTaylor GTE-50 GT-SeriesTaylor GTE-50 GT-Series

Features

Standard Features: GTE-50 & 60s

  • 130" Max Fork Height 2-Stage Mast with 85.2-in lowered height
  • 1.75-in X 4-in X 42-in pin mounted Forks (GTE-50)
  • 1.75-in X 5-in X 42-in pin mounted Forks (GTE-60s)
  • 3-phase AC transistorized drive and pump control
  • Enclosed dual 9.0 kW (AC) drive motors (independent control for tight turns)
  • 19.1 kW AC hydraulic motor
  • Planetary Drive Axle with hydraulically actuated wet disc brakes
  • Available in 80V Lithium or 48V Lead Acid
  • Fully Boxed Welded Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • Self Activating Parking Brake (SAPB) fully disables the transmission when the parking brake is set
  • 23 x 9-10 Solid Pneumatic Drive tires
  • 18 x 7-8 PR Solid Pneumatic Steer tires

Cab

  • Hydraulic levers conveniently mounted on the hood beside the operator
  • Ingress/Egress Handrails
  • Rear Handle with Horn Button
  • Operator Presence System (traction disable seat switch)
  • Hydrostatic Power Steering
  • Tilt steering wheel (power steer) with spinner knob
  • Dual adjustable convex Rear View Mirrors
  • Two pedal brake with inching
  • Full-suspension vinyl safety seat with orange seatbelt (w/hip restraints)
  • Interactive 5.6 inch LCD SMART dash (CAN) with On-Board diagnostics
  • ZAPI Controllers for advanced control and communication
  • Three selectable performance modes and turtle mode

Electrical

  • OHG mounted 12 volt LED headlights (including 12 volt converter)
  • Rear combination and turn signal lights
  • Electric Horn
  • Keyswitch-actuated amber strobe light
  • Reverse-actuated warning alarms

Vehicle Information Package

  • Operator's Guide
  • Maintenance and Service Documentation
  • Safety Check Manual and Video

Chassis

  • Single piece all-welded FEA verified steel frame with Heavy Duty fenders
  • Integral counterweight
  • 40.5" x 28" x 30.5" battery compartment (3435-lbs minimum battery weight)
  • Upright/Mast is pin mounted to the chassis (not trunnion mounted to axle)
  • Low step height for ease of entry
  • Anti-skid steps
  • Rubber Elastomeric Axle Dampening Blocks (improves lateral stability)
  • Recessed Tow Pin

Steer Axle

  • Heavy duty steer axle incorporates integral double steer cylinder
  • Single piece steer knuckles supported by tapered roller bearings which provide high durability and low maintenance
  • Full hydrostatic operation reduces mechanical links and eliminates kick back
  • Mounted on rubber isolator

Ergonomics

  • 11.2" diameter steering wheel with low-effort steer (w/spinner knob)
  • Large electronic directional control with no linkage - FWD/REV selected by moving lever up and down
  • Large oversized right lever operates turn signals and headlights
  • Large welded grab bar handle for solid secure mount
  • Deck mounted hydraulic control levers angled at 15 degrees back for precise driver operation
  • Self Activating Parking Brake (SAPB) fully disables the transmission when the parking brake is set

Uprights & Carriages

  • Nested I-beam upright design
  • Canted load rollers
  • Silent staging upright cylinders allows no racking between stages
  • Negative drop rails provide easy and inexpensive servicing of carriage
  • Spherical bushings on both ends of the tilt cylinders
  • Carriage features (6) load and side thrust rollers (shimmable, sealed and canted)
  • External side thrust rollers
  • Heavy duty roller chain that has 4 x 4 lacing with 1" pitch
  • Load back rest pallet protection
  • Fully greaseable pivot points

Overhead Guard

  • One piece provides strength and durability
  • Longitudinal overhead bars for better sight line when load is up
  • Low cowl height for greater visibility when load is in lowered position
  • Two forward mounted LED work lights with protective guards are standard
  • Rear combination lights (brake, tail and back-up) are standard

Available Options

  • 80V - 46AH Lithium Battery
  • Partial cabs (Top & Front)
  • 220V 3 phase lithium battery charger
  • Non-marking solid tires
  • Side shifters & Fork positioners
  • Fingertip controls (mini-levers)
  • Accumulators
  • Operator Cab with heater
  • Weight Scales
  • Automatic fork leveling
  • Unitrol Directional Control Pedal
  • Vision Plus

GTE-50

GT-Series

Quick Specs
Capacity 5K lbs / 2K kg
Load Center 24 in / 610 mm
Wheelbase 63.4 in / 1610 mm
Transmission TC-32 3-sp. APC
Mast 130
Carriage
Forks 1.75X4X42 in
Brakes Wet Disc
Volts 0
Tires 23x9-10 Front 18x7-8
Find Dealer

Features

Standard Features: GTE-50 & 60s

  • 130" Max Fork Height 2-Stage Mast with 85.2-in lowered height
  • 1.75-in X 4-in X 42-in pin mounted Forks (GTE-50)
  • 1.75-in X 5-in X 42-in pin mounted Forks (GTE-60s)
  • 3-phase AC transistorized drive and pump control
  • Enclosed dual 9.0 kW (AC) drive motors (independent control for tight turns)
  • 19.1 kW AC hydraulic motor
  • Planetary Drive Axle with hydraulically actuated wet disc brakes
  • Available in 80V Lithium or 48V Lead Acid
  • Fully Boxed Welded Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • Self Activating Parking Brake (SAPB) fully disables the transmission when the parking brake is set
  • 23 x 9-10 Solid Pneumatic Drive tires
  • 18 x 7-8 PR Solid Pneumatic Steer tires

Cab

  • Hydraulic levers conveniently mounted on the hood beside the operator
  • Ingress/Egress Handrails
  • Rear Handle with Horn Button
  • Operator Presence System (traction disable seat switch)
  • Hydrostatic Power Steering
  • Tilt steering wheel (power steer) with spinner knob
  • Dual adjustable convex Rear View Mirrors
  • Two pedal brake with inching
  • Full-suspension vinyl safety seat with orange seatbelt (w/hip restraints)
  • Interactive 5.6 inch LCD SMART dash (CAN) with On-Board diagnostics
  • ZAPI Controllers for advanced control and communication
  • Three selectable performance modes and turtle mode

Electrical

  • OHG mounted 12 volt LED headlights (including 12 volt converter)
  • Rear combination and turn signal lights
  • Electric Horn
  • Keyswitch-actuated amber strobe light
  • Reverse-actuated warning alarms

Vehicle Information Package

  • Operator's Guide
  • Maintenance and Service Documentation
  • Safety Check Manual and Video

Chassis

  • Single piece all-welded FEA verified steel frame with Heavy Duty fenders
  • Integral counterweight
  • 40.5" x 28" x 30.5" battery compartment (3435-lbs minimum battery weight)
  • Upright/Mast is pin mounted to the chassis (not trunnion mounted to axle)
  • Low step height for ease of entry
  • Anti-skid steps
  • Rubber Elastomeric Axle Dampening Blocks (improves lateral stability)
  • Recessed Tow Pin

Steer Axle

  • Heavy duty steer axle incorporates integral double steer cylinder
  • Single piece steer knuckles supported by tapered roller bearings which provide high durability and low maintenance
  • Full hydrostatic operation reduces mechanical links and eliminates kick back
  • Mounted on rubber isolator

Ergonomics

  • 11.2" diameter steering wheel with low-effort steer (w/spinner knob)
  • Large electronic directional control with no linkage - FWD/REV selected by moving lever up and down
  • Large oversized right lever operates turn signals and headlights
  • Large welded grab bar handle for solid secure mount
  • Deck mounted hydraulic control levers angled at 15 degrees back for precise driver operation
  • Self Activating Parking Brake (SAPB) fully disables the transmission when the parking brake is set

Uprights & Carriages

  • Nested I-beam upright design
  • Canted load rollers
  • Silent staging upright cylinders allows no racking between stages
  • Negative drop rails provide easy and inexpensive servicing of carriage
  • Spherical bushings on both ends of the tilt cylinders
  • Carriage features (6) load and side thrust rollers (shimmable, sealed and canted)
  • External side thrust rollers
  • Heavy duty roller chain that has 4 x 4 lacing with 1" pitch
  • Load back rest pallet protection
  • Fully greaseable pivot points

Overhead Guard

  • One piece provides strength and durability
  • Longitudinal overhead bars for better sight line when load is up
  • Low cowl height for greater visibility when load is in lowered position
  • Two forward mounted LED work lights with protective guards are standard
  • Rear combination lights (brake, tail and back-up) are standard

Available Options

  • 80V - 46AH Lithium Battery
  • Partial cabs (Top & Front)
  • 220V 3 phase lithium battery charger
  • Non-marking solid tires
  • Side shifters & Fork positioners
  • Fingertip controls (mini-levers)
  • Accumulators
  • Operator Cab with heater
  • Weight Scales
  • Automatic fork leveling
  • Unitrol Directional Control Pedal
  • Vision Plus