Taylor T-1035V Pneumatic Tire

Features

  • Maximum Hinge Pin Height - 12’ 11”
  • Cummins L9 Stage V diesel engine
  • Automatic Idle System
  • Cummins air cleaner w/safety element & restriction indicator
  • 5-Speed ZF Powershift Transmission
  • Powertrain Protection System for engine and transmission
  • ZF Limited Slip Drive Axles with Wet Disc Brakes
  • 26.5 R25 L3 Pneumatic Front Tires
  • 26.5 R25 L3 Pneumatic Rear Tires
  • Reversible Hydraulic Swing-Out Fan

Chassis

  • Heavy Duty Steel Chassis
  • Z-Bar Linkage features optimized geometry that positions the load closer to the tires and improves distribution of stress.
  • Auxiliary Valve Lines pre-plumbed for accessory functions
  • Hinge Pins and Lift Arm Mounting Plates are optimized with special heat treat process to increase strength.
  • Manually Actuated Fiberglass Hood ensures easy access to the engine and its easy-to-reach service points.
  • Both Rear Full Fenders swing out for easy access to the engine compartment.
  • Full rubber floor mat for dampening of vibration and noise.
  • The 4-Bar steps are widely spaced to allow debris to fall through.
  • Auto-lube system
  • Articulation Locking Bar
  • Hydraulic Quick Coupler
  • Rear Bumper Guard
  • Tow Hitch
  • Belly Guard

Cab

  • Panoramic View Cab with curved front glass (includes dome light, wide angle mirrors, handrails and full rubber black floor mats).
  • Certified ROPS/FOPS cab
  • Adjustable Grammer Air Suspension Seat provides maximum comfort and reduces operator fatigue
  • Adjustable Steering Column
  • Single Joystick Control
  • Gauge group that includes engine/transmission levels and temperatures, hydraulic temperature, voltage, hour meter, brake oil pressure, Fuel/DEF level and Engine faults.
  • Front and Rear Windshield Wiper
  • Operator Restraint System (Orange, anti-cinch seat belt)
  • Secondary Steering (emergency)
  • Heat, Air Condition and Rear Windshield Defrost
  • Rear View Camera Display
  • Sun Visor
  • Fire Extinguisher
  • Ride Control

Electrical

  • 24-volt electrical system
  • Maintenance free Heavy-duty batteries
  • Two front halogen lights (with high/low beam)
  • Two front LED lights (mounted top of cab)
  • Two rear LED lights (mounted top of cab)
  • Electric horn
  • Amber strobe light
  • Reverse actuated warning alarm

Vehicle Information Package

  • Operator's Guide
  • Maintenance and Service Documentation

T-1035V

Pneumatic Tire

Quick Specs
Capacity 39K lbs / 18K kg
Load Center in / 0 mm
Wheelbase 131.0 in / 3327 mm
Transmission ZF Powershift 5-sp.
Mast Z-Link
Carriage Std. Forks, Various Clamps, Dump Bucket
Forks

Available Attachments

Log & Pole Grapple
1. Log & Pole Grapple
Mill Yard Fork
2. Mill Yard Fork
Log & Lumber Fork with Hold-Down
3. Log & Lumber Fork with Hold-Down
Pipe Forks with Individual Top Clamp
4. Pipe Forks with Individual Top Clamp
Pipe Forks with Radius Top Clamp
5. Pipe Forks with Radius Top Clamp
Pipe Forks with Dual Top Clamp
6. Pipe Forks with Dual Top Clamp
General Purpose Bucket
7. General Purpose Bucket
Wood Chip Bucket
8. Wood Chip Bucket
Scrap Grapple
9. Scrap Grapple
in
Brakes Wet Disc
Volts 24
Tires 26.5 R25 L3
Find Dealer
Car Body Forks
Car Body Forks
WSC Scrap Grapple
WSC Scrap Grapple
Recycle Grapple
Recycle Grapple
WFF Log and Lumber Forks
WFF Log and Lumber Forks
General Bucket
General Bucket
Scrap Bucket
Scrap Bucket
Log & Pole Grapple
Log & Pole Grapple
Log & Lumber Fork with Hold-Down
Log & Lumber Fork with Hold-Down
Pipe Forks with Individual Top Clamp
Pipe Forks with Individual Top Clamp
Pipe Forks with Radius Top Clamp
Pipe Forks with Radius Top Clamp
Pipe Forks with Dual Top Clamp
Pipe Forks with Dual Top Clamp
Wood Chip Bucket
8. Wood Chip Bucket

Features

  • Maximum Hinge Pin Height - 12’ 11”
  • Cummins L9 Stage V diesel engine
  • Automatic Idle System
  • Cummins air cleaner w/safety element & restriction indicator
  • 5-Speed ZF Powershift Transmission
  • Powertrain Protection System for engine and transmission
  • ZF Limited Slip Drive Axles with Wet Disc Brakes
  • 26.5 R25 L3 Pneumatic Front Tires
  • 26.5 R25 L3 Pneumatic Rear Tires
  • Reversible Hydraulic Swing-Out Fan

Chassis

  • Heavy Duty Steel Chassis
  • Z-Bar Linkage features optimized geometry that positions the load closer to the tires and improves distribution of stress.
  • Auxiliary Valve Lines pre-plumbed for accessory functions
  • Hinge Pins and Lift Arm Mounting Plates are optimized with special heat treat process to increase strength.
  • Manually Actuated Fiberglass Hood ensures easy access to the engine and its easy-to-reach service points.
  • Both Rear Full Fenders swing out for easy access to the engine compartment.
  • Full rubber floor mat for dampening of vibration and noise.
  • The 4-Bar steps are widely spaced to allow debris to fall through.
  • Auto-lube system
  • Articulation Locking Bar
  • Hydraulic Quick Coupler
  • Rear Bumper Guard
  • Tow Hitch
  • Belly Guard

Cab

  • Panoramic View Cab with curved front glass (includes dome light, wide angle mirrors, handrails and full rubber black floor mats).
  • Certified ROPS/FOPS cab
  • Adjustable Grammer Air Suspension Seat provides maximum comfort and reduces operator fatigue
  • Adjustable Steering Column
  • Single Joystick Control
  • Gauge group that includes engine/transmission levels and temperatures, hydraulic temperature, voltage, hour meter, brake oil pressure, Fuel/DEF level and Engine faults.
  • Front and Rear Windshield Wiper
  • Operator Restraint System (Orange, anti-cinch seat belt)
  • Secondary Steering (emergency)
  • Heat, Air Condition and Rear Windshield Defrost
  • Rear View Camera Display
  • Sun Visor
  • Fire Extinguisher
  • Ride Control

Electrical

  • 24-volt electrical system
  • Maintenance free Heavy-duty batteries
  • Two front halogen lights (with high/low beam)
  • Two front LED lights (mounted top of cab)
  • Two rear LED lights (mounted top of cab)
  • Electric horn
  • Amber strobe light
  • Reverse actuated warning alarm

Vehicle Information Package

  • Operator's Guide
  • Maintenance and Service Documentation